In this report we’re going to examine how to create your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and techniques that you can use.
For those who have a dog that likes to bark, and especially if your dog loves to play in the garden and other areas of the house, you will need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup which will look a little scary at first, but it’s actually quite straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape out of the cardboard, so you’ll need to cut around the edge of the mask so you get something that resembles a cone. The most important thing here is to be realistic with what type of paper plate which you’re using.
Then you’ll need to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so you can ensure that nothing will leak once you put the mask on. Make sure the edges are cut so the edges aren’t sharp, as this can damage the edges of the mask.
Glue it http://lacasesolaire.com/2021/04/12/the-best-affordable-dog-food-finding-the-right-type-of-inexpensive-dog-food/ on! The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask first, so you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch of paint on the edges so that it runs over the cardboard.
Don’t fret too much about the paint getting stuck to your mask. It’s easy to remove it later, and it will leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint once you are done, so you don’t end up with smudges or smears on your dog.
Then it’s time to glue the mask onto your dog’s head. First you need to make sure that you have a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you can start to glue the mask onto the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and then fold it over. Be certain it’s quite strong and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you’ve got the mask snugged firmly onto the surface of your dog. Do not make the folds too large or else it could look messy. As soon as you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask on the dog. Make certain the ears are level and be certain it’s not too short or long as this can cause some issues with the mask slipping off the dog’s face.
If you’re using a dog mask as your pet security, you’ll have to do some sanding to be sure that it is secure on your dog. You can accomplish this by sanding off any excess paper which might have been eliminated from your mask.
